If you know how to crochet a basic granny square, then you can easily make these cute fingerless gloves. Just follow the simple steps below and you’ll have a new pair of gloves in no time.
To start, make a granny square that measures about 4 inches across.
Then, single crochet around the entire perimeter of the square. Once you reach the corner, slip stitch to join and turn your work.
Next, single crochet in each stitch across until you reach the last two stitches.
In the last two stitches, do a decrease by crocheting them together as one stitch. Then slip stitch to join and turn your work again.
Repeat this row until your glove measures about 7 inches long from the wrist to the fingertips or until it fits snugly around your hand.
To finish off, slip stitch around the entire perimeter of the glove and fasten off.
- Decide on the size of your gloves
- Crochet a foundation chain that is the same length as the circumference of your hand plus one extra stitch
- Single crochet in each stitch across the foundation chain until you have reached the desired width for your glove
- The number of rows will depend on the size of your hand
- To create the thumb hole, single crochet two stitches together at one end of the row to decrease the number of stitches
- Continue crocheting across the row until you have reached four stitches before the end of the row
- Again, single crochet two stitches together to decrease the number of stitches and continue crocheting until you reach the end ofthe row
- This will create a small opening for your thumb
- Crochet around all four sides ofthe rectangle until you reachthe starting point again
- Be sure to slip stitch intothe first stitch to close up any gaps
- Finish off by weaving in all loose ends
CROCHET simple FINGERLESS GLOVES
How Do You Make Homemade Fingerless Gloves?
Assuming you would like a tutorial on how to make fingerless gloves:
What You’ll Need:
-1/2 yard of fabric (flannel works well)
-Scissors
-Thread
-Pins
-Sewing machine
Instructions:
1. Cut two rectangles out of your fabric.
They should be about 8 inches wide and 12 inches long. Make sure the design is facing inwards so it will be on the inside of the gloves when you’re finished.
2. Pin the rectangles together along the 8 inch side, leaving a 1/4 inch seam allowance.
Sew along this side with a sewing machine, using a straight stitch set at a medium length. Flip the glove right side out so the seams are now on the inside.
3. Cut two more rectangles that are 3 inches wide and 12 inches long.
These will be used for the thumbholes, so make sure to cut them on an angle as shown in the photo below. Pin these onto each glove, placing them about 2 inches from the edge and making sure that the raw edges are all facing inwards towards the glove (so they’ll be sewn shut later). Sew around all four sides of each thumbhole rectangle using a zigzag stitch set at a medium length; this will help prevent fraying later on.
Again, flip each glove right side out so that all of the seams are now on the inside.
4 4 .
How Long Does It Take to Crochet Fingerless Gloves?
Assuming you are talking about basic fingerless gloves, it usually takes around 2-3 hours to crochet a pair. This time frame can be shortened or lengthened depending on the pattern and level of difficulty. For example, if you are using a more complicated stitch or adding embellishments, it will take longer.
If you are working with a thicker yarn or crocheting tightly, it will also take longer. However, if you are using a simple stitch and working with a thinner yarn, it will likely only take 2 hours or less.
Is Crocheting Gloves Easy?
If you know how to crochet a basic stitch, then you can definitely crochet gloves! Crocheting gloves is actually not as difficult as it may seem. The most important part is to make sure that your gauge is accurate so that your gloves fit well.
Once you have your gauge down, the rest is just crocheting in the round until the gloves are the desired length.
There are many different ways that you can approach crocheting gloves. You can start from the cuff and work your way up, or you can start from the fingers and work your way down.
Whichever method you choose, just be sure to follow your pattern carefully and pay attention to your gauge. With a little bit of patience and practice, you’ll be able to crochet beautiful gloves in no time!
How Much Yarn Do You Need to Crochet Fingerless Gloves?
If you’re looking to crochet a pair of fingerless gloves, you’ll need about 50 grams of yarn, depending on the size you’re making. For reference, one skein of Lion Brand Wool-Ease Thick & Quick Yarn weighs approximately 106 grams.
Credit: www.repeatcrafterme.com
30 Minute Crochet Fingerless Gloves
Do you feel the chill in the air? Winter is on its way, and that means it’s time to start thinking about cozy accessories! These 30 Minute Crochet Fingerless Gloves are the perfect project for busy crafters.
They work up quickly and easily, so you can make a pair (or two!) in no time.
These gloves are made with worsted weight yarn, so they’re nice and warm. And since they’re fingerless, you can still use your phone or tablet while wearing them.
The pattern is written for adult women’s sizes, but it can easily be adjusted to fit any size hand.
So grab your favorite yarn and hook, and get ready to make some cozy gloves! You’ll be glad you did when the cold weather hits.
How to Crochet Fingerless Gloves Step by Step
Assuming you would like a blog titled “How to Crochet Fingerless Gloves Step by Step”:
Step One: Choose your yarn. You’ll want to use a soft, worsted weight yarn for your gloves.
Acrylic is a good choice, since it’s inexpensive and easy to care for. Avoid using wool or other natural fibers, since they can be scratchy against your skin.
Step Two: Start with a magic ring.
If you’re not familiar with this technique, check out this video tutorial. You’ll start by making a small loop with your yarn, then inserting your hook into the loop and pulling up a loop of yarn. From there, you’ll yarn over and pull through both loops on your hook (this counts as one stitch).
Continue making single crochets into the ring until you have 8 stitches total.
Step Three: Join into a round. Once you have 8 stitches in your magic ring, join them together with a slip stitch in the first stitch (the one right after the slip knot on your hook).
You’ll now be working in rounds rather than rows – meaning that each row will circle around until you get back to where you started.
Step Four: Single crochet around for four rounds. For the next four rounds, simply single crochet around – putting one single crochet stitch into each stitch from the previous round.
At the end of Round 4, you should have 32 stitches total – 8 stitches from each of the four rounds.
Step Five: Create thumb hole opening. To create an opening for your thumb, single crochet 16 stitches (half of the total number), then chain 1 and skip one stitch before continuing to single crochet around as usual.
In other words, *single crochet in next stitch, chain 1, skip next stitch; repeat from * around until you’ve made 16 more single crochets past the point where you created the thumb hole opening (for a total of 48 stitches). This will leave an opening large enough for most thumbs – if yours is particularly large or small, feel free to adjust accordingly by skipping more or fewer stitches when creating the thumb hole opening . continue on working even Rounds 6-9 so that at beginning of Round 10 there are still 48 sts on needle . Now work Rounds 10-12 decreasing 2 sts every other round as follows:*(sc 2 together) twice , sc in next st; repeat from *around—40sts remain after Round 12 is completed .
Crochet Fingerless Gloves Free Pattern
Fall is the perfect time to break out the crochet hooks and make some cozy projects! These fingerless gloves are great for chilly weather, and they also make great gifts. This free pattern is easy to follow, even for beginners.
What you’ll need:
-Worsted weight yarn in your favorite color (I used Lion Brand Wool-Ease in “Oatmeal”)
-Size H (5mm) crochet hook
-Tapestry needle
-Scissors
Gauge: 4”x4” square = 14 stitches x 8 rows in half double crochet
Finished size: Approximately 7.5” long and 3.25” wide at the widest part of the hand
Notes: This pattern is written in standard US crochet terms.
Abbreviations Used: ch – chain, hdc – half double crochet, st(s) – stitch(es), sl st – slip stitch
Instructions:
Ch 26 loosely. To avoid your gloves being too tight, be sure not to pull too tight when you’re chaining!
Row 1: Hdc in 2nd ch from hook and each ch across. Ch 1, turn. (25 sts)
Row 2 – 9 : Hdc in each st across. Ch 1, turn.(25 sts) At the end of row 9 , do not fasten off or cut your yarn! You will continue working with this same piece of yarn throughout the rest of the pattern.
Fold your rectangle horizontally so that the two short sides are touching, as shown in the photo below . Using your tapestry needle, sew these two sides together using a whip stitch or a similar method . You should now have a tube shape . Be sure not to sew up the top or bottom openings !
Crochet Fingerless Gloves With Flap
Crochet fingerless gloves with flap are a great way to keep your hands warm while still being able to use your fingers. They are also great for people who have arthritis or other conditions that make it difficult to wear traditional gloves.
To make these gloves, you will need:
-Worsted weight yarn in any color (I used Lion Brand Wool-Ease in Fisherman)
-Size H (5 mm) crochet hook
-Tape measure or ruler
-Yarn needle
Start by chaining 24. If you want your glove to be a different size, just chain the number of stitches that corresponds to the measurement of your hand.
For example, if your hand is 7 inches wide, you would chain 28 stitches. Once you have reached the desired number of stitches, slip stitch into the first chain to form a loop. Be careful not to twist the chains.
Crochet Fingerless Gloves With Thumb
Crochet fingerless gloves with thumb are a great way to keep your hands warm while still being able to use your fingers. They are also great for people who have arthritis or other conditions that make it difficult to use their hands.
There are many different patterns available for crochet fingerless gloves, so you can find one that suits your style and needs.
Most patterns are worked in rounds, so you will need to know how to do a basic crocheted chain stitch and single crochet stitch before starting. Once you have mastered those stitches, you will be able to complete most fingerless glove patterns.
When choosing a yarn for your project, opt for something that is soft and comfortable against the skin.
wool or acrylic yarns work well for this purpose. If you plan on wearing your gloves outdoors, choose a yarn that is machine washable and dryable for easy care.
Once you have chosen your pattern and yarn, it’s time to start crocheting!
Work each row according to the instructions until the glove reaches the desired length. To finish off, slip stitch into the first stitch of the final round and fasten off. Weave in any loose ends using a tapestry needle.
Now that you’ve completed your first pair of crochet fingerless gloves with thumb, experiment with different pattern designs and color combinations to create unique looks!
Half Double Crochet Fingerless Gloves
Assuming you would like a blog post about how to make half double crochet fingerless gloves:
If you’re in need of a quick and easy gift, or simply want to make something special for yourself, look no further than these Half Double Crochet Fingerless Gloves! They work up quickly with only basic crochet stitches, so they’re perfect even for beginning crocheters.
And since they don’t use much yarn, they’re also great for using up leftover bits of worsted weight yarn that you might have lying around.
To make these gloves, you’ll need about 50 yards (46 meters) of worsted weight yarn in the color of your choice, as well as a size H (5 mm) crochet hook. You’ll also need a tapestry needle for weaving in ends.
These gloves are worked in continuous rounds; do not join at the end of each round unless otherwise specified.
The first step is to make the thumb gusset. To do this, start by making a slip knot and placing it on your hook; then chain 6 stitches.
Next, insert your hook into the second chain from the hook and make a half double crochet stitch; continue working half double crochet stitches into each remaining chain until you reach the last one. Now insert your hook into that last chain and pull up a loop; then insert your hook into the first chain from where you started (the one right next to the slip knot), and pull up another loop (3 loops now on hook). Yarn over and draw through all 3 loops to close the round (1 stitch made).
Next, continue working half double crochet stitches around without joining or turning; just keep going in a spiral until your work measures 2″ (5 cm) long from where you started making the thumb gusset rounds. At this point, stuff your thumb gusset lightly with fiberfill stuffing or similar before continuing on. Once stuffed, single crochet around the outside edge of the thumb gusset to close it off; then join with a slip stitch to the first single crochet made and fasten off, leaving a tail for later sewing if desired.
Set aside for now while we work on finishing up the glove body itself.
How to Crochet Gloves
Crocheting gloves is a great way to keep your hands warm in the winter. They are also perfect for gifts! Here is a step-by-step guide on how to crochet gloves:
1. Start by crocheting a chain that is about the circumference of your hand. Make sure to leave a long tail so that you can sew the glove closed later.
2. Row 1: Single crochet in each stitch across the row.
Chain one and turn.
3-9: Repeat row 1. Do not fasten off at the end of row 9.
10. To make the thumb, single crochet 4 stitches along one side of the rectangle (these will be the “top” stitches of the thumb).
Then, chain 2 and skip 2 stitches (this makes a hole for the thumb). Single crochet 4 more stitches along this “top” side of the rectangle (these will be the “bottom” stitches of the thumb). Slip stitch into next stitch to join and fasten off (see photo below for clarification).
11. Sew up sides of glove using long tail from beginning chain (or use a different color yarn if you prefer). Weave in all ends and voila – you have finished your first glove!
Conclusion
This post provides a pattern and instructions for crocheting easy fingerless gloves. The gloves are made using worsted weight yarn and a size H hook, and they can be crocheted in any color. The finished gloves will measure approximately 8″ long and 4″ wide.
To make the gloves, begin by chaining 24 stitches. Then, work in single crochet stitch across the row. When you reach the end of the row, turn your work and continue working in single crochet stitch until the piece measures 8″ long.
To finish off the glove, slip stitch across the last row to join it with the first row. Cut your yarn, leaving a long tail, and weave in all loose ends. Repeat these steps to make a second glove.
