In order to make a frisbee out of paper plates, you will need the following materials: two paper plates, scissors, stapler, and tape. First, take one of the paper plates and cut out a small circle in the center of it. Next, take the other paper plate and cut it in half.

Then, staple the two halves of the paper plate together so that they form a ring. Finally, tape the ring to the first paper plate (with the hole in it) so that it forms a Frisbee shape.

How to Make a Paper Plate Frisbee

  • Begin by cutting a paper plate in half
  • Next, cut each halves of the paper plate into thirds
  • You should now have six equal sized pieces of paper plate
  • Take two of the pieces and tape them together at the edges to form a cone shape
  • Do the same with the remaining four pieces of paper plate to create a second cone shape
  • Place the two cones upside down on top of each other and tape them together at the edges to form a Frisbee shape

How to Make a Frisbee Out of Cardboard

Frisbees are fun to play with and make great gifts, but did you know that you can easily make your own frisbee out of cardboard? It’s true! With just a few supplies and some simple instructions, you can create your very own Frisbee that is perfect for playing catch or flying through the air.

Here’s what you’ll need to get started: -One large piece of cardboard -A sharp knife or box cutter

-Ruler or measuring tape -Pencil or pen -Decorative duct tape (optional)

-Scissors first, use your ruler or measuring tape to draw a circle onto the piece of cardboard. This will be the template for cutting out your Frisbee.

Make sure the circle is about 10 inches in diameter. Once you have drawn the circle, carefully cut it out with your knife or box cutter. Next, use the scissors to round off the edges of your Frisbee.

You can also decorate the Frisbee with duct tape if desired. Finally, throw your new Frisbee around and have fun!

How to Make a Frisbee Come Back to You

Assuming you would like a blog post discussing how to make a Frisbee come back to you: Have you ever been playing catch with a friend and had the Frisbee sail past them, only for them to throw it back too hard and have it go sailing past you? It’s frustrating, isn’t it?

Well, never fear! With this easy guide, you’ll be able to make that Frisbee come right back to you every time. The first thing you need to do is get yourself a good quality Frisbee.

If you’re going to be playing with this thing a lot, then you might as well get one that’s built to last. There are tons of different brands and materials out there, so do some research and find the one that’s right for you. Once you’ve got your Frisbee, it’s time to start practicing.

The key to making a Frisbee come back to you is all in the wrist action. When you throw the Frisbee, snap your wrist forward as if you’re trying to hit something behind the disc. This will put spin on the disc and make it fly straighter.

As the FrisBee starts to slow down from its initial spin, it will begin wobbling from side to side. That’s when gravity takes over and pulls it down into your waiting hand. With a little practice, anyone can master this technique and have hours of fun with their friends (or by themselves).

So get out there and give it a try!

Frisbee Golf With Paper Plates

Frisbee golf is a great way to get outdoors and enjoy some friendly competition with friends or family. And, all you need are some paper plates and a Frisbee! It’s easy to set up your own course in your backyard or at a nearby park.

Here’s how: First, decide on the layout of your course. You’ll need 9 or 18 baskets (paper plates) to complete the course.

Place the baskets in different locations, making sure they are challenging but also achievable for all players. Next, each player will take turns throwing their Frisbee towards the basket. The goal is to get the Frisbee into the basket in as few throws as possible.

Keep score for each player and see who can complete the course with the lowest score! Frisbee golf is a fun way to enjoy time outdoors while getting some exercise. So round up some friends or family, grab some paper plates and Frisbees, and give it a try!

How to Make a Frisbee Out of Plastic

If you’ve ever wanted to make your own Frisbee, now’s your chance! You can easily create a Frisbee out of plastic, and it only takes a few materials. Here’s what you’ll need:

-A large piece of plastic (we used a cutting board) -A hot glue gun -Scissors

First, use the scissors to cut out a circular shape from the plastic. Then, use the hot glue gun to attach two pieces of string to the top and bottom of the Frisbee. These will be used for catching and throwing.

Finally, decorate your Frisbee however you’d like! We added some stickers, but you could also paint it or wrap it in duct tape. Now all that’s left to do is head outside and have some fun!

Paper Plate Frisbee Video

Paper Plate Frisbee Video: It’s a Fun Game for All Ages! Do you love playing frisbee but hate lugging around a heavy disc? Then this paper plate frisbee video is perfect for you!

This fun game can be played with just a few simple supplies, and it’s great for people of all ages. To play, you’ll need some paper plates, a sharpie, and tape. First, use the sharpie to draw a circle in the center of each paper plate.

Then, cut out the circles. Next, tape the two plates together at the edges so that they form a disc. Now you’re ready to play!

Just like regular frisbee, the goal is to throw your disc as far as possible. But be careful- if your disc hits the ground before it reaches your opponent, they get a point! The first person to 10 points wins.

This paper plate frisbee video is a great way to have fun without spending any money. So gather up some friends or family members and give it a try today!

How to Make a Frisbee Out of Paper Plates


Can You Use a Paper Plate As a Frisbee?

No, you cannot use a paper plate as a frisbee. A paper plate is not aerodynamic and will not fly.

How Do You Make a Homemade Frisbee?

A homemade frisbee can be made out of many different materials, but the most popular material to use is plastic. To make a plastic frisbee, you will need a large sheet of thin plastic. The best type of plastic to use is high-density polyethylene (HDPE), which can be found at most hardware stores.

Once you have your sheet of plastic, trace a circle onto it with a compass or ruler and cut it out with a utility knife. Now that you have your disc shape cut out, it’s time to add some design elements to it. If you want your frisbee to be plain, you can skip this step.

But if you want to personalize it, consider using stencils or stickers to decorate the surface. You could also use a permanent marker or paint pen to draw directly on the plastic. Once you’re happy with your design, set the frisbee aside and let the decoration dry completely.

The last step is to add grip tape to the top and bottom surfaces of your frisbee. Grip tape is available at most sporting goods stores and comes in various colors and widths. Simply peel off the backing and stick the tape onto your frisbee in whatever pattern you like.

Be sure to press down firmly so that the tape adheres well. And that’s it – your very own homemade frisbee!

How Do You Make a Frisbee Out of a Plate?

In order to make a frisbee out of a plate, you will need the following materials: a dinner plate, scissors, and duct tape. First, you will need to cut the dinner plate in half with the scissors. Next, you will need to take one of the halves and cut it into thirds.

Once you have done this, you will have six equal pieces. Next, you will need to take two of the pieces and tape them together at the edges so that they form a semi-circle. This will be the top and bottom part of your frisbee.

Finally, you will need to take the remaining four pieces and tape them together at the edges so that they form a circle. This will be the side of your frisbee.

How Do You Make a Easy Paper Frisbee?

Assuming you would like instructions on how to make a paper frisbee: You will need: -A sheet of 8.5×11″ paper

-Scissors -Tape (optional) Instructions:

1. Fold your sheet of paper in half hamburger style (fold the long way). 2. Cut along the fold until you are about an inch from the end. 3. Unfold the paper and then refold each side towards the center so that the cut you made forms a triangle pocket in the middle.

Tape down the sides if desired. 4. For extra stability, you can tape or glue another piece of paper to the backside. Your easy paper frisbee is now complete!


Do you have a couple of paper plates and some tape lying around? If so, then you can make your own Frisbee! It’s actually quite simple.

Just follow these steps: 1. Cut one of the paper plates in half. 2. Take the other paper plate and cut a small hole in the center.

3. Place the half-plate on top of the other plate (hole-side down), aligning the edges. 4. Use tape to secure the two plates together along their edges. 5. Trim any excess tape or paper from around the edge of your Frisbee.

6. Start playing catch!

About Author