Paper ninja stars, or “shuriken”, are traditional Japanese weapons that were historically used for throwing. Today, paper shuriken are mostly used for decorative purposes or as toys. However, they can also be used as practical and effective paper airplanes.
This tutorial will show you how to make a paper frisbee ninja star that flies well and is relatively easy to make.
You will need:
-1 sheet of 8.5″ x 11″ printer paper
-Scissors
-Tape
Instructions:
1. Start by folding your sheet of paper in half lengthwise. Then fold it in half again lengthwise. You should now have a long, skinny rectangle of paper.
2. Next, make two cuts into the folded edge of the paper, about an inch apart from each other. These cuts should go about halfway through the thickness of the paper (see photo).
How To Make a Paper Transforming Ninja Star – Origami
- Cut a strip of paper about 1 inch wide and 8 inches long
- Fold the strip in half lengthwise
- Make 4 evenly spaced cuts along the folded edge, stopping about ½ inch from the end
- Unfold the paper and then fold each cut section in half so that the center is now at the fold line
- Fold each side in towards the center so that they meet in the middle and form a point
- Secure the points with glue or tape and let dry
Origami Ninja Star 100 Point
Origami Ninja Star 100 Point – How to Make an Origami Ninja Star: This is a traditional origami model that is easy to make and requires only a single sheet of square paper. Follow the step-by-step instructions below to create your own origami ninja star.
How to Make a Paper Ninja Star That Hurts
One of the most satisfying things to do with a sheet of paper is to fold it into a ninja star. Not only does it look cool, but you can also use it as a weapon! If you want to make a paper ninja star that actually hurts, there’s a little bit of extra work involved.
But trust me, it’ll be worth it when you see the looks on your friends’ faces as they get hit by your flying ninja stars!
The first step is to start with a square piece of paper. You can use any kind of paper you want, but thinner papers will be easier to work with.
Once you have your square, fold it in half diagonally to create a triangle. Then, take the two bottom corners and bring them up to meet in the middle, creating another smaller triangle. Now fold this triangle in half again so that the two points meet in the middle.
At this point, you should have a long strip of paper that’s been folded into triangles. The next step is to take this strip and fold it over itself repeatedly until you have a small bundle of triangles. Make sure that each layer is offset from the one below it so that all the points are sticking out.
Once you’ve reached the desired thickness for your ninja star (I like mine about an inch thick), secure all the layers together by taping them at the center point.
Now comes the fun part: turning this bundle of triangles into an actual Ninja Star! To do this, simply take each point and bend it inward until it meets in the center.
You may need to use some tape or glue to keep everything together, but once you’re done folding all the points inward your Ninja Star should be complete! Just remember: sharp edges mean serious injuries, so handle with care!
Origami Ninja Star (8 Point)
An origami ninja star is a traditional Japanese paperfolding technique that can be used to create a variety of different shapes and designs. The most popular and well-known design is the eight-pointed star, which is also known as the “shuriken.”
Origami ninja stars are traditionally made from square sheets of paper, but you can also use rectangular sheets if you prefer.
To make an origami ninja star, start by folding the paper in half diagonally to form a triangle. Then, fold the triangle in half again to create a smaller triangle. Next, fold the triangle in half once more to create an even smaller triangle.
Now you will need to cut off the point of the triangle so that you have a straight edge to work with. Once you have done this, unfold all of the folds until you are left with a large square sheet of paper.
To begin folding the ninja star, take one corner of the paper and fold it towards the center of the square.
Then take the opposite corner and fold it towards the center as well. Continue folding all four corners into the center until you have a small square.
Next, take two opposing corners and fold them together so that they meet in the middle.
Repeat with the remaining two corners so that all four corners are now folded inwards towards the center of the square. You should now have a shape that looks like a diamond or kite.
To finish folding your origami ninja star, take each side ofthe diamond shape and fold it upwards so that it meets inthe middle at a point.
Once all four sides are folded up,flip your origami ninja star over and admire your handiwork!
Transforming Ninja Star Origami Step by Step
Recently, a new type of origami has been taking the internet by storm – transforming ninja star origami! This unique style of origami can be made into a traditional ninja star, or transformed into a variety of other shapes. Today, we’re going to show you how to make your own transforming ninja star origami step-by-step.
To get started, you’ll need two pieces of square paper. We recommend using 6″ x 6″ (15cm x 15cm) or larger squares for this project. Once you have your paper, fold it in half diagonally to create a triangle.
Then, fold the triangle in half again to create an even smaller triangle. Next, take the top corner and fold it down to meet the bottom edge of the triangle. Repeat this step on the other side.
Now comes the tricky part! Take the top layer of paper and fold it up so that the point meets the center crease. Then do the same with the bottom layer – but folding it down instead of up.
When you’re finished, your paper should look like a kite with two flaps on either side.
The next step is to transform those flaps into Ninja Stars! To do this, simply take each flap and fold it in half towards the center crease.
Now poke a hole through all four layers of paper at the very tip of each flap. Finally, pull each flap through its respective hole until they’re all poking out on one side. You’ve now created your first transforming ninja star!
There are endless possibilities for what you can do next with your star – experiment with different shapes and see what you can come up with!
How to Make a Ninja Star Step by Step
In order to make a ninja star, you will need the following materials:
-One sheet of paper
-A pair of scissors
-Tape or glue
Instructions:
1. Start by folding your sheet of paper in half lengthwise.
Then, fold it in half again widthwise. You should now have a small square.
2. Next, take one corner and fold it over to the opposite side.
Repeat with the other three corners so that all four points meet in the middle. You should now have a smaller square.
3. Now, fold this smaller square in half diagonally so that you have a triangle shape.
Then, cut along the folded edge about halfway up. Unfold your triangle and you should now have two identical triangles connected at the base.
4a.
To finish assembling your ninja star, take one triangle and insert its point into the pocket created by the cut on the other triangle (as shown in the first photo above). Tape or glue these two pieces together securely.*
OR
4b. For an alternate method of assembly, simply tape or glue all four points of both triangles together (as shown in the second photo above). This will create a star with eight “points” instead of four.*
Your ninja star is now complete!
Credit: www.instructables.com
How Do You Make a Paper Ninja Star Step by Step?
Assuming you would like a blog post on the steps to make an origami ninja star:
“How to Make an Origami Ninja Star”
Origami, the Japanese art of paper folding, is a great way to pass the time and make cool objects out of simple sheets of paper.
One popular origami project is the ninja star, which can be made with just a few folds. Here are the step-by-step instructions for how to make your own origami ninja star.
1. Start with a square sheet of paper.
If you don’t have any square paper handy, you can easily make one by folding up a regular rectangular sheet of paper into thirds lengthwise and then cutting off the excess at the top or bottom.
2. Fold your square sheet in half diagonally to form a triangle. Then unfold it and fold it in half again in the other direction so that you have two creases forming an X across your triangle.
3. Take hold of two opposite corners of your triangle and bring them together so that they meet in the middle, creating a small pocket or envelope shape. Crease well and unfold. This will be one blade of your ninja star.
Repeat with the other two corners so that you have three blades total.
4. Now take each blade and fold it in half along its length, bringing the outer edges together until they meet in the middle (but don’t actually glue or tape them down!). Once all three blades are folded this way, give your ninja star another good crease down its center line from top to bottom as well as side to side through all six blades – this will help everything hold together better when you open it up later on!
5 . To finish assembling your origami ninja star, simply open up each blade so that it lays flat again (like Step 3), but this time tuck one end of each blade into pockets formed by adjacent blades – tucking them under and then back out again so that everything stays securely fastened together without any adhesive required.
How Do You Make a Transforming Ninja Star Out of One Paper?
A transforming ninja star is a paper toy that can be transformed into different shapes. It is made out of one sheet of paper and can be folded into many different designs.
To make a transforming ninja star, first fold the paper in half lengthwise.
Then, fold the paper in half again widthwise. Next, cut off the top and bottom corners of the paper so that you are left with a rectangle.
Now, take one corner of the rectangle and fold it over to meet the opposite side.
Repeat this step with the other corner. You should now have a triangle shape.
Fold the triangle in half so that the two points meet in the middle.
Then, take one point and fold it over to meet the other point. This will create a smaller triangle inside of the first triangle.
Finally, repeat this step with the other point so that you have two small triangles inside of your original triangle.
Your transforming ninja star is now complete!
How Do You Make an 8 Pointed Ninja Star?
Origami is the traditional Japanese folk art of paper folding. The word origami comes from ORI meaning “to fold” and KAMI meaning “paper”. Ninja stars, also called shuriken, are one of the most popular origami models.
There are many different ways to make an 8 pointed ninja star. One way is to start with a square piece of paper and fold it in half twice to create a smaller square. Then, cut the square into four equal strips.
Take two strips and accordion fold them until they’re about 1/2 inch wide. Next, take the other two strips and do the same thing. Now take one of the folded strips and stand it up on its end so that it’s pointing straight up.
Take the strip next to it and put it over top, lining up the long edges. Tape or glue these two strips together at the point where they intersect in the middle. Repeat this step with the remaining two strips so that you have two sets of taped-together crossed strips.
Now take each set of crossed strips and hold them together so that they form an X shape. Tape or glue these X shapes together at their intersections in the middle to form a 4 pointed star shape. Finally, fluff out all eight points of your ninja star to give it a 3D effect!
How Do You Make a Double Transforming Ninja Star?
There are a few things you’ll need in order to make your own double transforming ninja star: two pieces of paper, scissors, and tape. Once you have those materials ready, follow these steps:
1. Fold each piece of paper in half lengthwise.
Then fold each one of those halves in half again lengthwise. You should now have four equal sections.
2. Cut along the folds on both pieces of paper so that you end up with eight strips total.
3. Take four of the strips and tape them together at the ends to form a plus sign (+). Make sure the taped seams are facing inward.
4. Do the same thing with the remaining four strips, but this time angle them so that they intersect in the middle ( forming an X).
Again, make sure the taped seams are facing inward.
5 . Now take your plus sign and fit it inside your X so that all the points meet in the middle.
Tape these two shapes together at the intersections to form a star shape with eight points .
6 . Finally , cut off any excess paper at the edges and voila!
Conclusion
The author begins by describing how to make a traditional paper frisbee. The user folds the paper in half, then in half again, and then cuts along the folded lines to create a symmetrical shape. Once the cutting is complete, the user opens up the paper and there should be four triangles.
The user then takes two adjacent triangles and folds them together so that the long sides meet in the middle and forms a cone shape. The user repeats this step with the remaining two triangles. Finally, the user takes all four cones and attaches them at their bases so that they form a star shape.
With these simple steps, anyone can easily make their own paper frisbee ninja star!
About Author
