There are a lot of reasons to wear slide gloves when you are skating. For one, they protect your hands from getting scraped up when you fall. They also help you keep your grip on the board, which is important for doing tricks.

And, they look cool! If you are thinking about buying a pair of slide gloves, here is what you need to know.

  • Before using slide gloves, make sure that the palms are free of any dirt or debris
  • To put on the slide gloves, first insert your hand into the glove from the wrist area
  • Once your hand is inside the glove, pull it up so that the fingers are positioned inside the finger area of the glove
  • Repeat this process for the other hand
  • To use the slide gloves, simply place your hands on a smooth surface and glide them across it

How To Turn Using Longboard Gloves (Sliding Gloves)

How Long Do Slide Gloves Last?

Assuming you are talking about longboarding gloves: On average, most slide gloves will last around 6-12 months with regular use. However, there are a few things you can do to help extend the life of your gloves and get the most out of them.

Here are a few tips: 1. Store your gloves in a cool, dry place when not in use. This will help prevent the material from drying out and cracking.

2. Avoid exposing your gloves to excessive sunlight or heat, as this can also cause the material to break down prematurely. 3. If possible, try to find gloves that are made from durable materials such as leather or Kevlar. These materials are more resistant to wear and tear and will last longer than cheaper alternatives.

4. Inspect your gloves regularly for signs of wear and tear, such as holes or fraying seams. If you see any damage, replace your gloves immediately to avoid further wear and tear. 5. When sliding, always make sure that your glove is properly positioned on your hand before making contact with the ground.

This will help prevent premature wear on the palms and fingers of your gloves. By following these simple tips, you can help extend the life of your slide gloves and keep them looking like new for longer!

How Do You Make a Sliding Glove?

Assuming you would like a tutorial on how to make a glove with a sliding mechanism: You will need the following materials: -1/4 yard of Lycra or Spandex fabric

-Thread to match your fabric -Scissors -Ruler or measuring tape

-1 small snap fastener -A needle and thread for hand sewing OR a sewing machine Instructions:

1. Begin by cutting out two rectangles of fabric that are 8” long and 4” wide. These will be the front and back panels of your glove. 2. On one long side of each rectangle, measure and mark 1” in from the edge and then 2” down from the top corner.

Draw a line connecting these marks. Repeat on the other long side so that you have two lines parallel to each other running down the length of each rectangle (these lines will create a “channel” for your slider mechanism). 3. Cut along these lines, being careful not to cut into the rest of your fabric rectangles.

You should now have four “flaps” at the top of each rectangle – two on each side. 4. Take one flap from the front panel and one flap from the back panel and put them right sides together (the sides with the cut lines facing inwards). Pin these together along their outer edges.

Sew along this pinned edge using a straight stitch, removing pins as you go. Repeat for remaining flaps so that all four are sewn together in pairs – two pairs total, one for front and one for back. Press seams open with an iron if desired. 5a) If hand sewing: Fold up bottom raw edge of each side channel towards wrong side of fabric by ½” and press flat with iron. Topstitch close to this fold to secure in place (this step helps stabilize raw edges inside channels).

Do You Need Gloves to Longboard?

No, you don’t need gloves to longboard. However, some people prefer to wear gloves while longboarding for a variety of reasons. Wearing gloves can help improve your grip on the board, protect your hands from getting scraped up if you fall, and keep your hands warm in colder weather.

If you decide to wear gloves while longboarding, be sure to choose a pair that is comfortable and won’t interfere with your ability to grip the board properly.

How Do You Slide on a Longboard for Beginners?

If you’re just getting started with longboarding, sliding is a great way to have some fun and learn the basics of board control. Here are a few tips to help you get started: 1. Start by riding down a gentle slope.

This will help you get used to the sensation of sliding and also give you a chance to practice controlling your speed. 2. When you’re ready, try riding across a flat section of pavement. To start sliding, simply lean your weight to one side of the board and shift your feet accordingly.

You can use your front foot to help initiate the slide by applying pressure as you turn. 3. As you become more comfortable sliding, you can experiment with different techniques such as changing your body position or altering the amount of pressure you apply to the deck with your feet. Just remember to always keep your weight centered over the board for stability purposes.

4. If at any point you feel like you’re losing control, just straighten up and ride away safely! Sliding takes practice so don’t get discouraged if it doesn’t come naturally at first – keep at it and soon enough you’ll be shredding like a pro!

How to Use Slide Gloves


Diy Slide Gloves

If you’re a fan of extreme sports, then you know how important it is to have the right gear. Slide gloves are an essential piece of equipment for anyone who wants to enjoy activities like skateboarding, rollerblading, and more. But what if you don’t want to spend the money on expensive gloves?

DIY slide gloves are the perfect solution! With a little bit of time and effort, you can easily make your own slide gloves that will provide the protection you need while still allowing you to stay within your budget. Here’s what you’ll need:

-1 pair of thick socks -Scissors -Tape (optional)

First, cut the toes off of the socks. Then, put the socks on your hands like you would a normal pair of gloves. If desired, you can use tape to secure the socks in place.

Now it’s time to get out there and enjoy your favorite extreme sports! Just be sure to take care when sliding – DIY slide gloves may not offer as much protection as professional ones.

Longboard Slide Gloves

Longboard slide gloves are a must-have for any serious longboarder. They help to protect your hands from the friction of the board, and also provide grip so you can keep your footing while sliding. There are many different types and brands of slide gloves available, so it is important to choose the ones that best fit your needs.

Here is some information to help you make an informed decision about which longboard slide gloves are right for you. The first thing to consider when choosing longboard slide gloves is the material they are made from. Leather is the most popular choice, as it is durable and provides good grip.

However, synthetic materials such as neoprene or polyester can also be used, and these may be more comfortable in warmer weather conditions. It is also important to choose gloves that fit well – too loose and they will not provide adequate protection, but too tight and they will be uncomfortable to wear. When trying on longboard slide gloves, pay attention to how they feel on your hands.

The palms should be well padded, and the fingers should have plenty of room to move around inside the glove. Make sure that there are no rough edges or seams that could rub against your skin and cause irritation. Once you have found a pair of gloves that fit well and feel comfortable, it is time to start thinking about style!

There are many different styles of longboard slide gloves available, from simple designs to those with elaborate embroidery or printing. Consider what kind of image you want to project when choosing your gloves – do you want something understated or flashy? If you plan on doing a lot of tricks on your board, then it might be worth investing in a pair of fingerless gloves so you can maintain better dexterity.

Whatever style you choose, make sure that your longboard slide gloves reflect your personality!

Triple 8 Slide Gloves

If you are a fan of skating, then you have probably heard of the Triple 8 Slide Gloves. These gloves are designed to protect your hands while you are skating. They are made of a durable material and they have a special grip that helps you keep your balance while skating.

The Triple 8 Slide Gloves come in a variety of colors and sizes, so you can find the perfect pair for your needs.


Slide gloves are a type of glove that is commonly used by BMX riders and skateboarders. They help to protect the hands from injuries caused by sliding on the ground. There are many different brands and styles of slide gloves available, so it is important to choose one that fits well and provides adequate protection.

Most slide gloves have palm pads and fingers pads to help cushion the hands during a fall. When choosing a pair of slide gloves, it is important to consider the size, material, and design. It is also important to make sure that the gloves fit snugly and do not slip off during use.

About Author